Really expensive Cast Iron Skillets

Food - recipes, reviews, and discussion
Message
Author
User avatar
Mark.Ricca
GCC Member
GCC Member
Posts: 3185
Joined: January 27th, 2009, 12:43 pm
Location: Central NJ got central heating and I'm alright...

Really expensive Cast Iron Skillets

#1 Post by Mark.Ricca » February 28th, 2019, 11:22 am

Going through old copies of the year end Saveur 100 issue.
Found this item and wondered if anyone bought in.
$300.00 for a cast iron skillet seems counter-intuitive to me, but hey.

http://boroughfurnace.com/shop/105-frying-skillet
ITB
"Bacon would improve the flavor of an angel"
"Outside of a dog a book is a man's best friend. Inside of a dog it's too dark to read."
"We're a lot like licorice. Not everybody likes licorice, but the people who like licorice, really like licorice."

User avatar
Paul Flynn
GCC Member
GCC Member
Posts: 329
Joined: January 27th, 2009, 2:17 pm

Re: Really expensive Cast Iron Skillets

#2 Post by Paul Flynn » February 28th, 2019, 11:44 am

2000% markup over Lodge.
Paul

“I have to have the most expensive thing, not because it’s the most expensive but because it costs more”

Cordelia Chase

User avatar
Mark.Ricca
GCC Member
GCC Member
Posts: 3185
Joined: January 27th, 2009, 12:43 pm
Location: Central NJ got central heating and I'm alright...

Re: Really expensive Cast Iron Skillets

#3 Post by Mark.Ricca » February 28th, 2019, 11:46 am

But, but, they're made from reclaimed iron!!

[rofl.gif]
ITB
"Bacon would improve the flavor of an angel"
"Outside of a dog a book is a man's best friend. Inside of a dog it's too dark to read."
"We're a lot like licorice. Not everybody likes licorice, but the people who like licorice, really like licorice."

User avatar
Robert M yers
Contributor
Contributor
Posts: 2195
Joined: March 10th, 2010, 8:24 pm
Location: Cleveland

Re: Really expensive Cast Iron Skillets

#4 Post by Robert M yers » March 1st, 2019, 6:39 am

I like the design, but that seems foolish.

User avatar
Victor Hong
Posts: 14467
Joined: May 30th, 2009, 1:34 pm

Re: Really expensive Cast Iron Skillets

#5 Post by Victor Hong » March 1st, 2019, 7:10 am

Perfect for boiling re-claimed water.
WineHunter.

User avatar
scamhi
GCC Member
GCC Member
Posts: 3729
Joined: January 30th, 2009, 1:31 pm

Re: Really expensive Cast Iron Skillets

#6 Post by scamhi » March 1st, 2019, 7:24 am

https://www.darto.org/us/products/
look at Darto Pans made in Argentina. Of pressed steel not cast. Truly beautiful once seasoned non stick. Super high quality
S u z a n n e C a m h i
instagram: suz_cam

User avatar
Jim Stewart
GCC Member
GCC Member
Posts: 864
Joined: July 31st, 2018, 9:49 am
Location: MA / FL

Re: Really expensive Cast Iron Skillets

#7 Post by Jim Stewart » March 1st, 2019, 8:30 am

Mark.Ricca wrote:
February 28th, 2019, 11:22 am
Going through old copies of the year end Saveur 100 issue.
Found this item and wondered if anyone bought in.
$300.00 for a cast iron skillet seems counter-intuitive to me, but hey.

http://boroughfurnace.com/shop/105-frying-skillet
Anybody else see the irony of making this comment on THIS site? (It's fermented grape juice folks)

User avatar
Bill Tex Landreth
Posts: 22793
Joined: January 27th, 2009, 11:45 am

Re: Really expensive Cast Iron Skillets

#8 Post by Bill Tex Landreth » March 1st, 2019, 9:34 am

scamhi wrote:
March 1st, 2019, 7:24 am
https://www.darto.org/us/products/
look at Darto Pans made in Argentina. Of pressed steel not cast. Truly beautiful once seasoned non stick. Super high quality
Do you have any? Really want a new paella pan.
It's not easy being drunk all the time. Everyone would be doing it if it were easy.

User avatar
scamhi
GCC Member
GCC Member
Posts: 3729
Joined: January 30th, 2009, 1:31 pm

Re: Really expensive Cast Iron Skillets

#9 Post by scamhi » March 1st, 2019, 11:54 am

I bought the #27 paella pan and it was so beautiful I gave it to my daughter and son in law. It is too small for more than 2 persons
S u z a n n e C a m h i
instagram: suz_cam

User avatar
Bill Tex Landreth
Posts: 22793
Joined: January 27th, 2009, 11:45 am

Re: Really expensive Cast Iron Skillets

#10 Post by Bill Tex Landreth » March 1st, 2019, 12:27 pm

I was thinking the 35 and have it double as a roaster.
It's not easy being drunk all the time. Everyone would be doing it if it were easy.

Lee Short
Posts: 1220
Joined: May 30th, 2009, 7:33 am
Location: Portland, OR

Re: Really expensive Cast Iron Skillets

#11 Post by Lee Short » March 2nd, 2019, 2:27 pm

scamhi wrote:
March 1st, 2019, 7:24 am
https://www.darto.org/us/products/
look at Darto Pans made in Argentina. Of pressed steel not cast. Truly beautiful once seasoned non stick. Super high quality
Carbon steel? The website isn't exactly forthcoming.
Last edited by Lee Short on March 2nd, 2019, 2:42 pm, edited 1 time in total.

User avatar
scamhi
GCC Member
GCC Member
Posts: 3729
Joined: January 30th, 2009, 1:31 pm

Re: Really expensive Cast Iron Skillets

#12 Post by scamhi » March 2nd, 2019, 2:31 pm

Lee Short wrote:
March 2nd, 2019, 2:27 pm
scamhi wrote:
March 1st, 2019, 7:24 am
https://www.darto.org/us/products/
look at Darto Pans made in Argentina. Of pressed steel not cast. Truly beautiful once seasoned non stick. Super high quality
Carbon steel? The website isn't exactly forthcoming?
yes carbon steel
S u z a n n e C a m h i
instagram: suz_cam

MitchTallan
GCC Member
GCC Member
Posts: 2550
Joined: June 3rd, 2009, 10:17 am

Re: Really expensive Cast Iron Skillets

#13 Post by MitchTallan » March 2nd, 2019, 7:42 pm

I have had this for 20 years and love it (along with a collection of Lodge). We use it mostly for brick spatchcock chicken. http://www.chasseur-brandshop.com/epage ... 3131-rubis

User avatar
Mark.Ricca
GCC Member
GCC Member
Posts: 3185
Joined: January 27th, 2009, 12:43 pm
Location: Central NJ got central heating and I'm alright...

Re: Really expensive Cast Iron Skillets

#14 Post by Mark.Ricca » March 3rd, 2019, 12:03 pm

scamhi wrote:
March 1st, 2019, 7:24 am
https://www.darto.org/us/products/
look at Darto Pans made in Argentina. Of pressed steel not cast. Truly beautiful once seasoned non stick. Super high quality
Zabar's used to carry generic French steel pans. My primary omelette pan is an 8" version of those. Really inexpensive but good quality, although that purchase was made nearly 30 years ago.

That Borough Furnace piece not only makes me thinks silly $$$, but that "Y" design handle seems like it would be an Achilles heel if dropped.
ITB
"Bacon would improve the flavor of an angel"
"Outside of a dog a book is a man's best friend. Inside of a dog it's too dark to read."
"We're a lot like licorice. Not everybody likes licorice, but the people who like licorice, really like licorice."

User avatar
Alan Eden
GCC Member
GCC Member
Posts: 3125
Joined: February 9th, 2014, 12:49 pm

Re: Really expensive Cast Iron Skillets

#15 Post by Alan Eden » March 3rd, 2019, 1:41 pm

There are 10 kinds of people in the world, those that understand binary and those that don't

User avatar
Alan Rath
GCC Member
GCC Member
Posts: 18464
Joined: April 24th, 2009, 12:45 am
Location: Bay Area, CA. Sometimes out to lunch.

Re: Really expensive Cast Iron Skillets

#16 Post by Alan Rath » March 3rd, 2019, 1:52 pm

Just got this one, don't remember if I read about it here on Berserkers, or somewhere else. Haven't seasoned and used it yet, but the quality looks very good.

https://madeincookware.com/products/blu ... 7160243279
I'm just one lost soul, swimming in a fish bowl, year after year

ybarselah
Posts: 5919
Joined: July 15th, 2009, 2:29 pm

Re: Really expensive Cast Iron Skillets

#17 Post by ybarselah » June 10th, 2019, 11:59 am

drop has great prices on my favorite black steel pan from matfer-bourgeat the 12 inch one has replaced pretty much every pan i had. huge step up from cast iron, imo. seasoning i think is maybe a bit easier than cast iron.

fyi, the sizing is confusing. the 12 5/8" pan has a 9.5" cooking surface (the flat part). for seasoning, i've been using the flax seed oil method and it's insane how non-stick it is.

rare when one of the cheapest versions you can buy ends up being the best but this seems to be one of those instances.

https://drop.com/buy/matfer-black-steel ... rer=KHHQTR
Yaacov (ITB)

User avatar
Josh Grossman
GCC Member
GCC Member
Posts: 1363
Joined: August 30th, 2017, 11:26 am

Re: Really expensive Cast Iron Skillets

#18 Post by Josh Grossman » June 10th, 2019, 1:00 pm

I've been fancying these:

Brian King
GCC Member
GCC Member
Posts: 375
Joined: May 1st, 2010, 6:37 pm

Re: Really expensive Cast Iron Skillets

#19 Post by Brian King » June 10th, 2019, 1:05 pm

I love these pans. I will say however that they've gotten ridiculously difficult to buy. The last few sales I've put on my calendar, logged in @ EXACTLY the appointed time, gotten a pan into my cart - but had them sell out before I could complete the transaction. Until things low down not sure I'l buy another (but I also have 3 already, so no real urgency either).

Michae1 P0wers
GCC Member
GCC Member
Posts: 4054
Joined: March 6th, 2010, 1:47 pm
Location: St. Louis

Re: Really expensive Cast Iron Skillets

#20 Post by Michae1 P0wers » June 14th, 2019, 7:08 am

My 100+ year old Griswold cracked this year, which was my fault as I took it out of a cold cabinet and put it on too high of heat. So I researched replacements thoroughly. I considered Finex, Field, Smithey, Stargazer, and a few others. Ultimately I settled on Stargazer. The reviews were great and at about $90 it was half the price or less than some others. So far I'm very happy with it. It's only been about a month but I use it a lot. Quality seems top notch, and I'm happy with the QPR.

Nathan V.
Posts: 1459
Joined: November 9th, 2009, 11:47 am

Re: Really expensive Cast Iron Skillets

#21 Post by Nathan V. » June 16th, 2019, 1:05 pm

scamhi wrote:
March 1st, 2019, 7:24 am
https://www.darto.org/us/products/
look at Darto Pans made in Argentina. Of pressed steel not cast. Truly beautiful once seasoned non stick. Super high quality
How did the transaction and shipping go (and how long did it take)?

Pans look cool.
ITB-ish.
V = V a n der g r i f t

User avatar
scamhi
GCC Member
GCC Member
Posts: 3729
Joined: January 30th, 2009, 1:31 pm

Re: Really expensive Cast Iron Skillets

#22 Post by scamhi » June 17th, 2019, 4:21 am

transportation and shipping went well via DHL. Pans need seasoning before use.
S u z a n n e C a m h i
instagram: suz_cam

Sarah Kirschbaum
Posts: 2446
Joined: September 20th, 2010, 11:53 am

Re: Really expensive Cast Iron Skillets

#23 Post by Sarah Kirschbaum » June 17th, 2019, 5:58 am

I bought a set of deBuyer pans years ago on sale and have never gotten around to seasoning them. They've now moved houses with me twice.

Tom G l a s g o w
GCC Member
GCC Member
Posts: 4461
Joined: February 19th, 2010, 2:01 pm

Re: Really expensive Cast Iron Skillets

#24 Post by Tom G l a s g o w » June 17th, 2019, 6:09 am

Sarah Kirschbaum wrote:
June 17th, 2019, 5:58 am
I bought a set of deBuyer pans years ago on sale and have never gotten around to seasoning them. They've now moved houses with me twice.
I had quite the ordeal seasoning mine. Have yet to use it.

User avatar
Alan Eden
GCC Member
GCC Member
Posts: 3125
Joined: February 9th, 2014, 12:49 pm

Re: Really expensive Cast Iron Skillets

#25 Post by Alan Eden » June 17th, 2019, 6:47 am

Seasoning Debuyer pans takes like 20 minutes and is simple. All you do is peel a few potatoes, put them in the pan filled with water and simmer for 20 minutes, hey presto fully season pan. Dont overthink it, plus the seasoning just builds up naturally with use, the trick is never to let soap or detergent anywhere near the pan
There are 10 kinds of people in the world, those that understand binary and those that don't

Brian Gilp
Posts: 2422
Joined: May 29th, 2010, 6:00 am

Re: Really expensive Cast Iron Skillets

#26 Post by Brian Gilp » June 17th, 2019, 9:10 am

Michae1 P0wers wrote:
June 14th, 2019, 7:08 am
My 100+ year old Griswold cracked this year, which was my fault as I took it out of a cold cabinet and put it on too high of heat. So I researched replacements thoroughly. I considered Finex, Field, Smithey, Stargazer, and a few others. Ultimately I settled on Stargazer. The reviews were great and at about $90 it was half the price or less than some others. So far I'm very happy with it. It's only been about a month but I use it a lot. Quality seems top notch, and I'm happy with the QPR.
I have a Field and a Butter Pat and love them both. Such a step up from the cheap cast iron that I had for many years that I know understand the love others have for a quality cast iron pan. I find that I am using these more and more and thinking of a few more.

Tom G l a s g o w
GCC Member
GCC Member
Posts: 4461
Joined: February 19th, 2010, 2:01 pm

Re: Really expensive Cast Iron Skillets

#27 Post by Tom G l a s g o w » June 18th, 2019, 7:17 pm

Alan Eden wrote:
June 17th, 2019, 6:47 am
Seasoning Debuyer pans takes like 20 minutes and is simple. All you do is peel a few potatoes, put them in the pan filled with water and simmer for 20 minutes, hey presto fully season pan. Dont overthink it, plus the seasoning just builds up naturally with use, the trick is never to let soap or detergent anywhere near the pan
I don’t remember anything about water. Oil yes, but not water.

User avatar
Alan Eden
GCC Member
GCC Member
Posts: 3125
Joined: February 9th, 2014, 12:49 pm

Re: Really expensive Cast Iron Skillets

#28 Post by Alan Eden » June 18th, 2019, 10:06 pm

Tom G l a s g o w wrote:
June 18th, 2019, 7:17 pm
Alan Eden wrote:
June 17th, 2019, 6:47 am
Seasoning Debuyer pans takes like 20 minutes and is simple. All you do is peel a few potatoes, put them in the pan filled with water and simmer for 20 minutes, hey presto fully season pan. Dont overthink it, plus the seasoning just builds up naturally with use, the trick is never to let soap or detergent anywhere near the pan
I don’t remember anything about water. Oil yes, but not water.
The method i describe is straight off the label supplied on the pan
There are 10 kinds of people in the world, those that understand binary and those that don't

Tom G l a s g o w
GCC Member
GCC Member
Posts: 4461
Joined: February 19th, 2010, 2:01 pm

Re: Really expensive Cast Iron Skillets

#29 Post by Tom G l a s g o w » June 19th, 2019, 5:36 am

Alan Eden wrote:
June 18th, 2019, 10:06 pm
Tom G l a s g o w wrote:
June 18th, 2019, 7:17 pm
Alan Eden wrote:
June 17th, 2019, 6:47 am
Seasoning Debuyer pans takes like 20 minutes and is simple. All you do is peel a few potatoes, put them in the pan filled with water and simmer for 20 minutes, hey presto fully season pan. Dont overthink it, plus the seasoning just builds up naturally with use, the trick is never to let soap or detergent anywhere near the pan
I don’t remember anything about water. Oil yes, but not water.
The method i describe is straight off the label supplied on the pan
Sorry, confused my Matfer-Bourgeat with your De buyer. M-B has a wax coating.

ybarselah
Posts: 5919
Joined: July 15th, 2009, 2:29 pm

Re: Really expensive Cast Iron Skillets

#30 Post by ybarselah » June 19th, 2019, 9:55 am

all steel pans regardless of brand will have some coating when stored and shipped to prevent oxidation (beeswax in the case of de buyer). so that needs to be washed off prior to first use, as indicated in all the instructions that come with these things. and all steel pans must be seasoned in order to cook properly and the only way to do that is with fat. water does...nothing.
Yaacov (ITB)

David Fleming
Posts: 24
Joined: November 6th, 2011, 1:46 pm

Re: Really expensive Cast Iron Skillets

#31 Post by David Fleming » June 19th, 2019, 3:44 pm

ybarselah wrote:
June 19th, 2019, 9:55 am
all steel pans regardless of brand will have some coating when stored and shipped to prevent oxidation (beeswax in the case of de buyer). so that needs to be washed off prior to first use, as indicated in all the instructions that come with these things.
Well, not Kama-Asa: http://www.kama-asa.co.jp/en/tool/fryingpan/ (hand hammered, not cast).

Iwachu is another Japanese manufacturer of nice cast iron.

User avatar
Ken Strauss
GCC Member
GCC Member
Posts: 4724
Joined: November 22nd, 2015, 9:03 am
Location: Sunny South Florida

Re: Really expensive Cast Iron Skillets

#32 Post by Ken Strauss » June 19th, 2019, 4:00 pm

Blanc Creatives makes a terrific product.
The website also has a write up on how to smoke season which they say is their favorite way to season. They ship after coating with coconut oil and cooking.

https://blanccreatives.com/featured
"Explaining is not supporting."

"Independence is a state of mind"

ybarselah
Posts: 5919
Joined: July 15th, 2009, 2:29 pm

Re: Really expensive Cast Iron Skillets

#33 Post by ybarselah » June 20th, 2019, 12:00 pm

David Fleming wrote:
June 19th, 2019, 3:44 pm
ybarselah wrote:
June 19th, 2019, 9:55 am
all steel pans regardless of brand will have some coating when stored and shipped to prevent oxidation (beeswax in the case of de buyer). so that needs to be washed off prior to first use, as indicated in all the instructions that come with these things.
Well, not Kama-Asa: http://www.kama-asa.co.jp/en/tool/fryingpan/ (hand hammered, not cast).

Iwachu is another Japanese manufacturer of nice cast iron.
no idea why, but likely because they're shipping directly to a very small audience. but they're not magically immune from chemistry. you don't have to coat it, but it certainly prevents it from getting ruined in transit, storage, resellers, etc.
Yaacov (ITB)

David Fleming
Posts: 24
Joined: November 6th, 2011, 1:46 pm

Re: Really expensive Cast Iron Skillets

#34 Post by David Fleming » June 20th, 2019, 1:55 pm

ybarselah wrote:
June 20th, 2019, 12:00 pm
no idea why, but likely because they're shipping directly to a very small audience. but they're not magically immune from chemistry. you don't have to coat it, but it certainly prevents it from getting ruined in transit, storage, resellers, etc.
Yeah, thinking the same thing, but they do an initial seasoning on them. I've been to their shop in Tokyo and checked out the pans. Very nice, but there is a waiting list to buy them since they are all handmade.

User avatar
CliftonD
Posts: 162
Joined: January 3rd, 2017, 1:00 pm
Location: Queens, NY

Re: Really expensive Cast Iron Skillets

#35 Post by CliftonD » July 31st, 2019, 9:12 am

scamhi wrote:
March 1st, 2019, 7:24 am
https://www.darto.org/us/products/
look at Darto Pans made in Argentina. Of pressed steel not cast. Truly beautiful once seasoned non stick. Super high quality
PSA [cheers.gif]

There's a 50% off sale tomorrow - https://www.darto.org/us/
D - o - n - g

User avatar
scamhi
GCC Member
GCC Member
Posts: 3729
Joined: January 30th, 2009, 1:31 pm

Re: Really expensive Cast Iron Skillets

#36 Post by scamhi » July 31st, 2019, 2:08 pm

I am ready CliftonD
S u z a n n e C a m h i
instagram: suz_cam

User avatar
Jeff Rosenberg
GCC Member
GCC Member
Posts: 273
Joined: April 26th, 2015, 6:38 pm
Location: Webster, NY

Re: Really expensive Cast Iron Skillets

#37 Post by Jeff Rosenberg » July 31st, 2019, 4:03 pm

CliftonD wrote:
July 31st, 2019, 9:12 am
scamhi wrote:
March 1st, 2019, 7:24 am
https://www.darto.org/us/products/
look at Darto Pans made in Argentina. Of pressed steel not cast. Truly beautiful once seasoned non stick. Super high quality
PSA [cheers.gif]

There's a 50% off sale tomorrow - https://www.darto.org/us/
Everything is out of stock [scratch.gif]

User avatar
c fu
Moderator
<dfn>Moderator</dfn>
Posts: 30653
Joined: January 27th, 2009, 1:26 pm
Location: Pasadena

Re: Really expensive Cast Iron Skillets

#38 Post by c fu » July 31st, 2019, 7:16 pm

Jeff Rosenberg wrote:
July 31st, 2019, 4:03 pm
CliftonD wrote:
July 31st, 2019, 9:12 am
scamhi wrote:
March 1st, 2019, 7:24 am
https://www.darto.org/us/products/
look at Darto Pans made in Argentina. Of pressed steel not cast. Truly beautiful once seasoned non stick. Super high quality
PSA [cheers.gif]

There's a 50% off sale tomorrow - https://www.darto.org/us/
Everything is out of stock [scratch.gif]
It’ll come in stock tnrw
Ch@rlie F|_|
"Roulot is Roulot"©

Instagram: http://www.instagram.com/clayfu.wine

Nathan V.
Posts: 1459
Joined: November 9th, 2009, 11:47 am

Re: Really expensive Cast Iron Skillets

#39 Post by Nathan V. » August 1st, 2019, 6:13 am

CliftonD wrote:
July 31st, 2019, 9:12 am
scamhi wrote:
March 1st, 2019, 7:24 am
https://www.darto.org/us/products/
look at Darto Pans made in Argentina. Of pressed steel not cast. Truly beautiful once seasoned non stick. Super high quality
PSA [cheers.gif]

There's a 50% off sale tomorrow - https://www.darto.org/us/
Thanks!
ITB-ish.
V = V a n der g r i f t

User avatar
Josh Grossman
GCC Member
GCC Member
Posts: 1363
Joined: August 30th, 2017, 11:26 am

Re: Really expensive Cast Iron Skillets

#40 Post by Josh Grossman » August 1st, 2019, 6:35 am

Just got two 25" pans (one for a gift) and four small paella pans to use a serving dishes I can cook or grill in. Thanks for the heads up.

Douglas Breen
GCC Member
GCC Member
Posts: 218
Joined: September 1st, 2010, 2:51 pm

Re: Really expensive Cast Iron Skillets

#41 Post by Douglas Breen » August 1st, 2019, 11:51 am

I picked up one extra for a present also to get the free shipping ($150). Exactly what my kitchen needs. I cook much more after I’ve retired. My Lodge cast iron will get a break. Needed smaller skillets for steaks and mushrooms- mmm!

User avatar
scamhi
GCC Member
GCC Member
Posts: 3729
Joined: January 30th, 2009, 1:31 pm

Re: Really expensive Cast Iron Skillets

#42 Post by scamhi » August 1st, 2019, 12:57 pm

I bought 2 of the no 35 paella pans to get the free shipping. Once these are seasoned they are gorgeous
S u z a n n e C a m h i
instagram: suz_cam

User avatar
c fu
Moderator
<dfn>Moderator</dfn>
Posts: 30653
Joined: January 27th, 2009, 1:26 pm
Location: Pasadena

Re: Really expensive Cast Iron Skillets

#43 Post by c fu » August 1st, 2019, 3:12 pm

got a 20 and 27 saute and a 27 paella. looking forward to em! Retire that lodge cast iron pan. ha
Ch@rlie F|_|
"Roulot is Roulot"©

Instagram: http://www.instagram.com/clayfu.wine

User avatar
scamhi
GCC Member
GCC Member
Posts: 3729
Joined: January 30th, 2009, 1:31 pm

Re: Really expensive Cast Iron Skillets

#44 Post by scamhi » August 1st, 2019, 3:49 pm

Josh Grossman wrote:
August 1st, 2019, 6:35 am
Just got two 25" pans (one for a gift) and four small paella pans to use a serving dishes I can cook or grill in. Thanks for the heads up.
if you purchased the no.25 pan the size is in cm not inches. it is 8.2" diameter
S u z a n n e C a m h i
instagram: suz_cam

User avatar
Jeff Rosenberg
GCC Member
GCC Member
Posts: 273
Joined: April 26th, 2015, 6:38 pm
Location: Webster, NY

Re: Really expensive Cast Iron Skillets

#45 Post by Jeff Rosenberg » August 2nd, 2019, 4:08 pm

I’m in for two #35 Paella pans. Have been looking for a quality carbon steel Paella pan.

User avatar
c fu
Moderator
<dfn>Moderator</dfn>
Posts: 30653
Joined: January 27th, 2009, 1:26 pm
Location: Pasadena

Re: Really expensive Cast Iron Skillets

#46 Post by c fu » August 22nd, 2019, 8:24 am

Anyone know when these are getting shipped? Thought it was immediate
Ch@rlie F|_|
"Roulot is Roulot"©

Instagram: http://www.instagram.com/clayfu.wine

User avatar
Josh Grossman
GCC Member
GCC Member
Posts: 1363
Joined: August 30th, 2017, 11:26 am

Re: Really expensive Cast Iron Skillets

#47 Post by Josh Grossman » August 22nd, 2019, 9:08 am

c fu wrote:
August 22nd, 2019, 8:24 am
Anyone know when these are getting shipped? Thought it was immediate
I received notice it was supposed to by the end of the day today from DHL

User avatar
c fu
Moderator
<dfn>Moderator</dfn>
Posts: 30653
Joined: January 27th, 2009, 1:26 pm
Location: Pasadena

Re: Really expensive Cast Iron Skillets

#48 Post by c fu » August 22nd, 2019, 9:56 am

Josh Grossman wrote:
August 22nd, 2019, 9:08 am
c fu wrote:
August 22nd, 2019, 8:24 am
Anyone know when these are getting shipped? Thought it was immediate
I received notice it was supposed to by the end of the day today from DHL
ah, still haven't gotten a shipping notice on mine. I did note the email said "after aug 26th"
Ch@rlie F|_|
"Roulot is Roulot"©

Instagram: http://www.instagram.com/clayfu.wine

Nathan V.
Posts: 1459
Joined: November 9th, 2009, 11:47 am

Re: Really expensive Cast Iron Skillets

#49 Post by Nathan V. » August 22nd, 2019, 9:56 am

c fu wrote:
August 22nd, 2019, 9:56 am
Josh Grossman wrote:
August 22nd, 2019, 9:08 am
c fu wrote:
August 22nd, 2019, 8:24 am
Anyone know when these are getting shipped? Thought it was immediate
I received notice it was supposed to by the end of the day today from DHL
ah, still haven't gotten a shipping notice on mine. I did note the email said "after aug 26th"
Yeah, that's what mine said as well.
ITB-ish.
V = V a n der g r i f t

User avatar
GregT
Posts: 7691
Joined: April 15th, 2009, 3:12 pm

Re: Really expensive Cast Iron Skillets

#50 Post by GregT » August 22nd, 2019, 11:28 am

There are a few nice looking craftsman skillets around these days. I don't know where they get their iron but I guess you can find old engine blocks or something just like the Chinese versions.


This looks pretty cool. And it's polished. Not sure about how practical the handle is.

finex.jpg



These are polished too, unlike most cast iron made today.

stargazer.jpg




This is made from wrought iron, not cast iron, so should be stronger. If you've ever dropped a cast iron pan on cement accidentally, the handle can actually break off. Not that it's particularly common, but I've done it. And the handle is longer here, which supposedly keeps it pretty cool. I've been toying with the idea of picking it up but as my wife points out, we have eight cast iron and enameled cast iron skillets now and we really don't need another. Still . . .

aus ion.jpg
aus ion.jpg (4.67 KiB) Viewed 325 times
G . T a t a r

[i]"the incorrect overuse of apostrophes is staggering these days. I wonder if half the adults these days have any idea what they are for." Chris Seiber, 5/14/19[/i]

Post Reply

Return to “Epicurean Exploits”